Wolverine Logan Hugh Jackman File STL 3D Printing

in total is composed of 1,8 mil points all the files have been decimated by the polygons, but without losing the details, this makes the light files suitable for each computer

dimensions approximately FDM-FFF D 13 Cm W 14 Cm H 30 Cm D 5 Inch W 5,5 inch H 11 inch

dimensions approximately DLP-SLA-SLS D 6,5 Cm W 7 Cm H 15 Cm D 2,5 inch W 2,7 inch H 6 inch

all files are already in place for optimal printing

3D model was designed to get a clean print result, without considering printing material consumption, However, you are free to rotate, or scale, every part of the model in the most convenient way for you. Each file has been checked and repaired with Netfabb The parts of the model are already positioned for 3D printing Compatible with every Slicer- Simplify3D, Care, Slic3r, etc ... All the parts of the model have been cut so as to be printed vertically, for a higher quality of printing

Wolverine

Wolverine is a fictional character appearing in American comic books published by Marvel Comics, mostly in association with the X-Men. He is a mutant who possesses animal-keen senses, enhanced physical capabilities, a powerful regenerative ability known as a healing factor, and three retractable claws in each hand. Wolverine has been depicted variously as a member of the X-Men, X-Force, Alpha Flight, and the Avengers. The character appeared in the last panel of The Incredible Hulk #180 before having a larger role in #181 (cover-dated November 1974). He was created by Marvel editor-in-chief Roy Thomas,[2] writer Len Wein,[3] and Marvel art director John Romita Sr. Romita designed the character's costume, but the character was first drawn for publication by Herb Trimpe. Wolverine then joined a revamped version of the superhero team the X-Men, where eventually writer Chris Claremont and artist-writer John Byrne would play significant roles in the character's development. Artist Frank Miller collaborated with Claremont and helped revise the character with a four-part eponymous limited series from September to December 1982, which debuted Wolverine's catchphrase, "I'm the best there is at what I do, but what I do best isn't very nice." Wolverine is typical of the many tough antiheroes that emerged in American popular culture after the Vietnam War;[4]: 265 his willingness to use deadly force and his brooding nature became standard characteristics for comic book antiheroes by the end of the 1980s.[4]: 277 As a result, the character became a fan favorite of the increasingly popular X-Men franchise,[4]: 263, 265 and has been featured in his own solo comic book series since 1988. He has appeared in most X-Men adaptations, including animated television series, video games, and the live-action 20th Century Fox X-Men film series, in which he is played by Hugh Jackman. Troye Sivan portrayed a younger version in the 2009 film X-Men Origins: Wolverine. The character is highly rated in many comics best-of lists, ranked #1 in Wizard magazine's 2008 Top 200 Comic Book Characters;[5] 4th in Empire's 2008 Greatest Comic Characters;[6] and 4th on IGN's 2011 Top 100 Comic Book Heroes "wikipedia"

Recommended settings for printing

each part was cut to be printed vertically, to have a better quality print, so for the upper parts, it is recommended to print with a 4-5 skirt

Quality Layer height: 0.1mm* Initial layer thickness: 0.3mm Bottom/top pattern: lines Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers). *Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double.

As a STL file provider, our goal is to ensure that the files are error-free and printable in the most accurate way. This is why we only test print the most difficult segments of the model’s parts.

The model's parts have been tested and printed in PLA. In case you need advice where to get your filaments from, check our partner's website.

Speed setups: Infill speed: 30mm/s Outer shell speed : 30mm/s Inner shell speed: 20mm/s Top/bottom speed: 20mm/s Support speed: 50mm/s Travel speed: 150mm/s Skirt speed: 30mm/s Amount of slower layers: 4 Infill:

Infill pattern: Grid Line distance: 1.5mm Infill overlap: 20% Infill layers: 0 Support:

Enable support: Check Placement: Everywhere Overhang angle: 30° X/Y distance: 0.7mm Top distance: 0.2mm Bottom distance: 0.2mm Stair step height: 0.5mm Join distance: 0.7mm Area smoothing: 0.6mm Use towers: check Pattern: Grid Line distance: 1.5mm

LEGAL PRIVACY POLICY: Any UNAUTHORIZED use of my profile, video, pictures or audio in any form or in a forum now or in the future is NOT permissible without my expressed written consent. Any act to promote or gain profit in any manner (e.g. either monetarily or socially) from the use of my profile, video, pictures or audio in any form my profile is a violation of my privacy and subject to legal action. BY WATCHING THIS: You acknowledge and agree that you shall not post, upload, publish, transmit or make available in any way content of this page including images and recording streamed live video available for download. This is intended as, and presented as a one time, live, one view presentation only. Penalties of Copyright Infringement: By reproducing, republishing or redistributing the work of a copyright holder without permission, you may be violating or infringing on his or her rights under the Copyright Act. The copyright holder may sue for compensation cost from $ 250 to $ 150,000 or one year jail sentence

You will get 13 files

All files previously purchased will always be available for download in your Library

{{ productFilesPreview.expanded ? 'Minimize' : 'Show all files ('+13+')' }}

Wolverine Logan Hugh Jackman File STL 3D Printing

You will get 13 files

Similar products