Batman Signal Searchlight Lamp 3D model

in total Batman Signal is composed of 2,2 mil points all the files have been decimated by the polygons, but without losing the details, this makes the light files suitable for each computer

dimensions approximately W 15 Cm D 15 Cm H 20 Cm W 6 inch D 6 inch H 8 inch

however, the dimensions can be changed with each slicer all files are already in place for optimal printing

Batman Signal 3D model was designed to get a clean print result, without considering printing material consumption, However, you are free to rotate, or scale, every part of the model in the most convenient way for you. Each file has been checked and repaired with Netfabb The parts of the model are already positioned for 3D printing Compatible with every Slicer- Simplify3D, Care, Slic3r, etc ... All the parts of the model have been cut so as to be printed vertically, for a higher quality of printing

The Bat-Signal is a distress signal device appearing in American comic books published by DC Comics, as a means to summon the superhero, Batman. It is a specially modified searchlight with a stylized emblem of a bat affixed to the light, allowing it to project a large bat symbol onto cloudy night skies over Gotham City.[1] The signal is used by the Gotham City Police Department as a method of contacting and summoning Batman in the event his help is needed, but also as a weapon of psychological intimidation to the numerous criminals of Gotham City.[2] It doubles as the primary logo for the Batman series of comic books, TV shows, and films. To celebrate Batman's 80th anniversary, DC Comics and Warner Bros. lit the Bat-Signal in thirteen cities on September 21, 2019, starting in Melbourne and ending in Los Angeles. The Bat-Signal first appeared in Detective Comics #60 (February 1942). The signal has several different origins in comics featuring post-Crisis continuity. It is introduced as a new tool after Batman's first encounter with the Joker in the 2005 series Batman: The Man Who Laughs, and also during the 1990 "Prey" storyline in Legends of the Dark Knight. In the 2006 series Batman and the Mad Monk, Commissioner James Gordon initially uses a pager to contact Batman, but during a meeting with the superhero, Gordon throws it away, saying he prefers a more public means of contacting him. After Batman departs, Gordon looks out at the city and considers the exceptional view from his current position, hinting at the future creation of the Signal. In the 1989 Batman film, Batman gives the signal to the Gotham police force, enabling them to call him when the city was in danger. In 2005's Batman Begins, then-lieutenant James Gordon installs the Bat-signal on the roof of the police department himself. The film suggests Gordon was inspired to create the signal after Batman left mobster Carmine Falcone chained across a spotlight after a confrontation at the docks, Falcone's silhouette on the spotlight vaguely resembling a bat. On the 1992 television show Batman: The Animated Series, the signal is introduced in the episode "The Cape and Cowl Conspiracy", though a makeshift signal was used earlier in "Joker's Favor". In 2004's The Batman, Gordon invents it to summon Batman in "Night in the City", although the signal is also alluded to in an earlier episode. "wikipedia"

Recommended settings for printing

each part was cut to be printed vertically, to have a better quality print, so for the upper parts, it is recommended to print with a 4-5 skirt

Quality Layer height: 0.1mm* Initial layer thickness: 0.3mm Bottom/top pattern: lines Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers). *Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double.

As a STL file provider, our goal is to ensure that the files are error-free and printable in the most accurate way. This is why we only test print the most difficult segments of the model’s parts.

The model's parts have been tested and printed in PLA. In case you need advice where to get your filaments from, check our partner's website.

Speed setups: Infill speed: 30mm/s Outer shell speed : 30mm/s Inner shell speed: 20mm/s Top/bottom speed: 20mm/s Support speed: 50mm/s Travel speed: 150mm/s Skirt speed: 30mm/s Amount of slower layers: 4 Infill:

Infill pattern: Grid Line distance: 1.5mm Infill overlap: 20% Infill layers: 0 Support:

Enable support: Check Placement: Everywhere Overhang angle: 30° X/Y distance: 0.7mm Top distance: 0.2mm Bottom distance: 0.2mm Stair step height: 0.5mm Join distance: 0.7mm Area smoothing: 0.6mm Use towers: check Pattern: Grid Line distance: 1.5mm

LEGAL PRIVACY POLICY: Any UNAUTHORIZED use of my profile, video, pictures or audio in any form or in a forum now or in the future is NOT permissible without my expressed written consent. Any act to promote or gain profit in any manner (e.g. either monetarily or socially) from the use of my profile, video, pictures or audio in any form my profile is a violation of my privacy and subject to legal action. BY WATCHING THIS: You acknowledge and agree that you shall not post, upload, publish, transmit or make available in any way content of this page including images and recording streamed live video available for download. This is intended as, and presented as a one time, live, one view presentation only. Penalties of Copyright Infringement: By reproducing, republishing or redistributing the work of a copyright holder without permission, you may be violating or infringing on his or her rights under the Copyright Act. The copyright holder may sue for compensation cost from $ 250 to $ 150,000 or one year jail sentence

You will get 2 files

All files previously purchased will always be available for download in your Library

Batman Signal Searchlight Lamp 3D model

You will get 2 files

Similar products